Merge Dragons Hack EZ πŸ”₯ Free GEMS in 5 Minutes Cheats Android & iOS Hack

Open -> Merge Dragons Hack 2020

This new Merge Dragons Cheat is the best generator that was built for Merge Dragons. With this new Merge Dragons Hack you can generate unlimited free Gems on any Android and iOS devices.

I’ve tested on both android and iOS device and it works very well without any problem. This is the only working Merge Dragons cheat that i have tested so far.

Thanks for watching this video tutorial

ί”Ε This only works for iOS and Android ߔō


Also subscribe to our channel for more Merge Dragons Glitches

I have been using a truck wheel sitting on bricks as a fire pit for a while and decided legs would be better and a grate would stop the wood falling through. This was also a chance to practice and maybe improve my terrible arc welding.

I use this firepit to burn pallet offcuts and thicker branches and look at while drinking lemon squash, I have a larger burn barrel for burning green leafy awkward garden waste.

0:00 the wheel
0:07 measuring and marking leg length
0:15 cutting legs
0:30 deburring legs
0:44 marking leg position and cleaning metal to be welded
1:04 making jig to hold legs in position
2:34 welding leg to wheel
3:14 cutting leg ends parallel with ground
3:46 cutting pipe for feet
4:03 deburring pipe for feet
4:16 marking cut lines to cut pipe for feet in half axially
4:39 cutting pipe in half for feet
5:01 hammering half pipes flat for feet
5:40 marking cut lines on feet
6:29 cutting feet to shape
6:38 sanding feet to shape
6:48 welding feet to legs
7:30 feet attached
7:34 making cardboard templates for hole filler pieces
7:55 marking pipe for filler pieces
8:10 cutting pipe to length for filler pieces
8:30 deburring pipe for filler pieces
8:47 cutting pipe for filler pieces
9:31 unrolling cut pipe for filler pieces
9:46 hammering unrolled pipe flat for filler pieces
10:24 marking cut lines for filler pieces
10:42 cutting out filler pieces
11:09 deburring filler pieces
11:26 fitting filler piece for valve stem hole
11:30 hammering curves into filler pieces for wheel holes
11:43 welding filler pieces in place
11:32 drafting grate pattern
12:59 cutting grate sections
13:24 deburring grate sections
13:46 welding grate into base of wheel
14:35 finished pire pit
14:46 installing a fire
14:55 burning fast

Wheel is off an old Bedford truck, 50mm ~5mm wall (2″ SCH 80?)pipe came from a free curbside badly built workbench, 12mm (1/2″) rebar came from a parking lot. Welding rods are some 2mm general purpose ones which didn’t work very well for attaching the legs to the wheel and then 3.2mm 6013 rods for the rest which were much easier to use.

Tools in order of appearance

rafter/framing square
speed square
permanent marker
355mm /14″ cut off saw
bench sander with wire wheel
115mm/4.5″ angle grinder with rust/paint strip disc
quick clamps
600mm ruler
HB pencil
brad nailer
claw hammer
ebay Inverter arc welder
flux chipping hammer
wire brush
115mm/4.5 inch angle grinder with thin cutting disc mounted to flat cutting jig made out of formply (film faced plywood)
centre finder (made out of two speed squares, a piece of wood and a quick clamp)
F clamp
4 pound sledgehammer
vice grip locking pliers
tin snips ILO scissors
100mm/4″ bench vice
shifting spanner/monkey wrench/nut rounder
short piece of railway line
2D CAD program
dolly made from office chair wheels and scrap wood

Open -> Merge Dragons Hack 2020